Calculators · Materials

Sandwich panel quantity calculator

Wall and roof layouts, geometric joints, and preliminary sealing and accessory takeoff based on entered details.

Input data

Sandwich panel

Joints and accessories

Select physical joint types for one entered installation scheme. An empty mapping does not assign sealing automatically.

Result

Panel layout and bill of materials

Net wall area— m²
Panels—

Wall panels and fasteners

Base: steel frame. The entered model has not been verified against a manufacturer datasheet.

Gross / net wall area: —

Opening perimeter: —

Panels (blank): —

Vertical joints: —

Main screws Net / purchasing: —

Historical size (not an active minimum): —

Project type size: —

Specific product documentation: —

Fastener quantity is calculated from the mounting-point layout and does not by itself check connection resistance.

PositionNetPurchase
Panels——
Main screws——
Joint length——
Cutting waste——

SP 70.13330.2012, Amendment No. 8: clauses 4.7.12–4.7.20 excluded; clause 7.3.5 — size by design and/or working documentation

JV 362.1325800.2017, n. 10.2–10.6: fastener resistance is confirmed using normative data / tests

Joints and accessories

Physical joints follow the current layout; no sealing scheme is selected.

Physical joint register

JV 362.1325800.2017: scope, n. 1

GOST 32603-2021: scope

Wall panel layout diagramRoof panel and purlin diagram
Schematic view; openings shown at the entered coordinates.
    Calculation trace and data sources
    Calculation technical data

    Scope and limits

    Joint geometry comes from the entered wall or roof layout. Tape, sealant, cavity fill and trim quantities are calculated only for joint types explicitly selected by the user. Entered project and manufacturer references are not automatically verified for applicability. No connection resistance, fire-rated assembly or roof load design is performed.

    Sources: JV 362.1325800.2017; GOST 32603-2021.