Subscription· early access

1-LVL · CNC Production

HW2030 Operator

Operator application for working with CNC control programs

HW2030 Operator accepts a ready-made control program regardless of theCAD/CAM-she was prepared for the system. The main condition is a correct CP with commands supported by the equipment and control system.

Control programVerified
01
Circuit· Ø6panel_a.tap · example file
Ready
02
Pocket· Ø8panel_b.tap · example file
Current
03
Drilling· Ø5panel_c.tap · example file
Waiting

Work process for preparing and executing CP

  1. 01CAD / CAM
  2. 02Postprocessor
  3. 03Control program
  4. 04HW2030 Operator
  5. 05NcStudio
  6. 06CNC machine

How does this work

FromCAD/CAM before processing

Direct connection to the training program is not required:Operator works with the result of its work - a ready-made control program.

  1. 01Create processing in the usualCAD/CAM-system
  2. 02Generate a control program through a postprocessor
  3. 03Transfer the finished UE toHW2030 Operator
  4. 04Work directly with the control program
  5. 05Use the programmer to perform processing on the machine

Compatibility

Compatible withCAD/CAM-systems

HW2030 Operator does not require special integration with a specificCAD/CAM-system. The already generated control program is transferred to the application.

Therefore, the source of the UE can be almost any program capable of generating a compatibleG-code through a suitable post-processor.

Examples of UE sources

  • Vectric Aspire
  • VCarve
  • Cut2D
  • ArtCAM
  • Carveco
  • Autodesk Fusion
  • Mastercam
  • PowerMill
  • SprutCAM
  • SolidCAM
  • RhinoCAM
  • SheetCAM
  • FreeCAD CAM
  • SketchUp with UP generator
  • Own generatorsG-code

The list is provided as an example and is not a closed list of supported programs. Compatibility is determined by the structure of the software usedG/M-commands and post processor.

Independence fromCAM

Independence from the training program

ForHW2030 Operator is not of fundamental importance, the UE was created inAspire, Fusion, SprutCAM or another system. If the post processor generates a compatible control program, it can be used in an existing workflow.

JobHW2030 Operator with the control program used and tested in a real work process.

Postprocessor

What determines compatibility

The post-processor plays a key role - it is he who transforms the trajectoriesCAM into a set of commands intended for a specific CNC system.

  • 01G-codes
  • 02M-codes
  • 03Units of measurement
  • 04Absolute or relative positioning
  • 05Circular interpolation
  • 06Innings
  • 07Spindle speed
  • 08Tool change
  • 09Coordinate system

Operator's workplace

Control program in a workshop process

The application helps you go through the work sequence and record what was actually done without changing the original UP.

01

Ready UE

The work process begins with an already generated control program compatible with the equipment.

02

Job queue

Clear statuses and a strict sequence of control programs help to carry out work in stages.

03

Control before work

Selecting the installed cutter and explicitly confirming the zero markZ before each operation.

04

Actual resource

The mileage of the cutting tool is taken into account according to the actually completed part of the program, and not according to the plan.

05

Result of the operation

Complete or partial completion, material, notes and reasons for stopping are recorded in the task.

06

Local data

The application runs locally and stores production data in its own database on the workshop computer.

Responsibility

The application accompanies, but does not control the machine

The launch of the UE remains manual

The operator independently loads the program intoNcStudio, checks coordinates, tools, modes and safe heights, performs a dry run and only then starts processing.

  • The current working configuration has been verified forHW2030 and NcStudio 5.5.60.
  • Other machines and configurations require separate technical testing.
  • Operator does not defineCAM automatically and does not correct UP commands.
  • The program does not replace the manufacturer's instructions and safety rules.

Licensing

Access to the application is by subscription

Subscription involves using the current version and receiving updates. Tariffs, payment period, number of jobs and support structure are at the stage of formation.

Apply right here. Access will only appear after the administrator's decision.

To apply, log in to your account 1-LVL.

Login to apply