Ready

1-LVL · SketchUp Tools

SketchUp CAM

Plugin for preparing milling operations, calculating trajectories and creating a set of control programs directly from the workflowSketchUp.

CAM packageVerified
01
TrajectoriesOutlines· grooves· pockets
Calculated
02
ToolCutters and operations
Assigned
03
Export.tap + manifest + setup
Ready

SketchUp CAM

Two ready variants

Both variants generate a job package for operator review. A public download link is not configured; request access details.

Ready

NCStudio CAM

For general 2D/2.5D tasks in NcStudio: calculates toolpaths for contours, slots, pockets and drilling. It then creates a job package with a setup sheet.

Ready

HouseKit CAM

For house kits: checks the component TABLE, sheets, parts and labels, then creates a job package and setup sheet.

Possibilities

Preparation of UE in the context of the model

The plugin combines part geometry, operations and tools in oneCAM-task, which can then be transferred to the operator’s workplace.

01

Outlines

Preparation of trajectories for processing external and internal contours of parts.

02

Grooves

Formation of technological passages for groove operations.

03

Pockets

Calculation of material sampling with controlled approaches and processing depth.

04

Drilling

Preparation of coordinate operations for holes in parts.

05

Tool base

Assignment of cutters from an agreed set and transfer of their composition to the operator.

06

Export a job

UP, list of cutters, installation map, manifest and preview data.

Workflow

From model to production set

  1. 01Prepare the geometry of parts inSketchUp
  2. 02Assign operations, depths and tools
  3. 03Calculate and visually check trajectories
  4. 04Export NC via post processorNcStudio
  5. 05Transfer the kit to the operator's application

Quality of trajectories

Verifiable changesCAM-kernels

For pocket operations, a regression scenario has already been established to prevent an untreated wedge from appearing on the bottom during an inclined entry. Previously exported jobs must be recalculated and uploaded again after such changes.

  • Calculations are carried out in millimeters.
  • The postprocessor generates programs for the configuration being checkedNcStudio.
  • Compatibility with other controllers is not declared without testing.

Safety

CAM does not cancel operator verification

Each UE requires verification before launch

The operator checks the coordinate system, selected cutter, feeds, depths and safety heights, performs a visual check and a dry run. The plugin does not control the machine and does not start processing.

Continuation of the process

The task acceptsHW2030 Operator

The operator application shows the order of control programs, requires you to select the actual cutter and confirm zeroZ, and after work records the result and tool life.

Open pageHW2030 Operator

Licensing

Access and distribution

The local variants are ready. Public automated downloads are not yet configured; version delivery and subscription terms must be agreed separately before commercial release.

Online payment and personal account are not yet connected.

Request terms and conditions